WiFi Quad Relay Board with ESP8266 for IoT & Home Automation
Posted: Mon May 30, 2016 5:13 pm
https://www.kickstarter.com/projects/20 ... ot-and-hom
We present to you the "WiFi Quad Relay Board". An advanced version of our previous ESP8266 based WiFi enabled board with which also includes a 100-230V /5V AC/DC power supply so that you will be able to connect it directly to AC mains - creating 4 WiFi enabled smart devices at the same time. It also has the node MCU compatible header where you can connect I2C based devices like an OLED or sensors like PIR, IR, Temperature etc.... so you can not only control four individual appliances but also add sensors and displays to make your home as 'smart' as you want.
Board consists of 100-240V AC to 5V DC converter.
Four Relays to connect four AC/DC loads. Both NC/NO connectors of the relay are provided.
Can connect additional sensors like PIR, IR, Temperature, Humidity, Limit switch etc.
WiFi Quad Relay Board can be programmed as "MQTT Client" for Networking/Home automation integration.
SSID and Password can be set directly from the mobile phone web browser using default firmware.
LED for Testing which is connected to a GPIO and also as indicator when the relay go on /off.
Dimensions of the board are 145 X 60 X 22 mm.
We present to you the "WiFi Quad Relay Board". An advanced version of our previous ESP8266 based WiFi enabled board with which also includes a 100-230V /5V AC/DC power supply so that you will be able to connect it directly to AC mains - creating 4 WiFi enabled smart devices at the same time. It also has the node MCU compatible header where you can connect I2C based devices like an OLED or sensors like PIR, IR, Temperature etc.... so you can not only control four individual appliances but also add sensors and displays to make your home as 'smart' as you want.
Board consists of 100-240V AC to 5V DC converter.
Four Relays to connect four AC/DC loads. Both NC/NO connectors of the relay are provided.
Can connect additional sensors like PIR, IR, Temperature, Humidity, Limit switch etc.
WiFi Quad Relay Board can be programmed as "MQTT Client" for Networking/Home automation integration.
SSID and Password can be set directly from the mobile phone web browser using default firmware.
LED for Testing which is connected to a GPIO and also as indicator when the relay go on /off.
Dimensions of the board are 145 X 60 X 22 mm.